Flying-Hobby
CELLPRO 4S TO GREAT PLANES/KOKAM ADAPTER
Great Planes ElectriFly ..." />
,
Product Details Interconnects any 2s to 4s Great Planes ElectriFly ...Flying-Hobby
CELLPRO 10S TO GREAT PLANES/KOKAM ADAPTER
Great Planes "Electrify" ..." />
,
Product Details Interconnects any 2s to 6s Great Planes "Electrify" ...Flying-Hobby
DJI SPREADING WINGS S800 PART NO.2 - FRAME ARM ( EVO CLOCKWISE )
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, Features:, Compatible with S800;,
Greatly enhanced rigidity; Multistrand SR Wires of power and signal ...Flying-Hobby
DJI SPREADING WINGS S800 PART NO.1 - FRAME ARM ( EVO COUNTER CLOCKWISE )
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, Features:, Compatible with S800;,
Greatly enhanced rigidity; Multistrand SR Wires of power and signal ...Flying-Hobby
35A BRUSHLESS ESC(GOVERNER MODE) RCE-BL35P
| ●Contimuous current | 35Amps |
| ●Surge current | 45Amps for 15seconds |
| ●Supporting motor types | 2 poles to 10+poles in/outrunner brushless motors |
| ●Supporting maximum RPM | 2poles=>190,000rpm |
| ●Supporting input voltage | 5.5V~16.8V |
| ●Supporting battery types | Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells |
| ●BEC output | 5~6V,current 3A |
| ●Size | 58X22X11mm |
| ●Weight | 30g |
| Accessories | plus |
Instructions:, Fearture:, ●BEC output voltage(5~6V) to show great performance on the torque & speed of servo., Specification:,
●Three programmable throttle speed settings to support quick throttle response. ...Flying-Hobby
WASHOUT BASE
| Specification | Washout base x 1 |
Instruction:, New washout base has modified the length of the collar, to reduce the clearance between the washout base and the control levers for great 3D performance.,
Collar x 1(Φ5xΦ6.5x13mm)Flying-Hobby
BL 700H HIGH VOLTAGE BRUSHLESS SERVO
| ●Stall torque | 15.0kg.cm(6.0V) |
| ●Motion speed | 0.085sec/60°(6.0V) |
| ●Rating voltage | DC 4.8-7.4V |
| ●Temperature range | -20°C至+60°C |
| ●Dimension | 40.3 x 20.1 x 38.7mm |
| ●Weight | 69g |
Instruction:, ●Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased., ●Designed specifically for helicopters, with highest specifications on the market: 0.065sec/60°ultra fast speed and 20kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision., Specification:, Accessories:, ●Servo rudder piece x 4,
●Supports 7.4v high voltage to provide optimal speed and torque ...Flying-Hobby
ALIGN RCE-G600 GOVERNOR RCE-G600
| ●Speed resolution | 0.1RPM |
| ●Speed stability accuracy | within 1%(Steady State) |
| ●Operating voltage | DC4.5V-6V |
| ●Consumption current | <20mA@4.8V |
| ●Speed control range | 10500~21000RPM |
| ●Servo RWM output pulse width | 1~2ms，not apply to S9251、S9256 and other 760μs servos. |
| ●Operating temperature range | -20°C~85°C |
| ●Operating moisture range | 0%~95% |
| ●Case size(body) | 28.5x26.2x9mm |
| ●Signal wire length | 160mm |
| ●Sensor wire length | 250mm |
| ●Weight | 10g(including wires) |
Instructions:, ●Compact design, easy use, simple setting with great speed control performance., Specification:, Accessories:, ●RPM Magnet x 2(Φ4x1.5mm),
●Not apply to S9251、S9256 and other 760μs servos ●Direct detection ...Flying-Hobby
ADJUSTABLE THRIPLE-BEARING ALUMINUM ENGINE BEARING BLOCK
Description:, -The new precision ADJUSTABLE thriple-bearing aluminum engine block is designed to replace stock plastic engine block for T-REX 700 Nitro helicopters. This new version adds ability to adjust the gear mesh between the pinion and the main gear. Therefore the main gear is less stripped due to inappropriate alignment. The new aluminum engine block is designed with rigid one-piece aluminum block to avoid wear-out problem that leads to unalignment of the pinion to the main gear, thus causing the gear strip problem. The bearing block is very well designed to have both rigidity, precision and very light weight. To further strengthen the engine clutch, this new design incorporates an additional third bearing into the engine block. This additional bearing provides great support for the motor pinion shaft to keep the pinion always aligns with the main gear. This engine block is the ticket to solve main gear strip problem on the T-REX 700 helicopters., Includes:, -One aluminum engine block, Features:*,
-One aluminum engine block cap -One (1) radial bearing (thrid ...Flying-Hobby
TREX 700-TRIPLE-BEARING ALUMINUM ENGINE BEARING BLOCK
Description:, -The new precision thriple-bearing aluminum engine block is designed to replace stock plastic engine block for T-REX 700 Nitro helicopters. The new aluminum engine block is designed with rigid one-piece aluminum block to avoid wear-out problem that leads to unalignment of the pinion to the main gear, thus causing the gear strip problem. The bearing block is very well designed to have both rigidity, precision and very light weight. To further strengthen the engine clutch, this new design incorporates an additional third bearing into the engine block. This additional bearing provides great support for the motor pinion shaft to keep the pinion always aligns with the main gear. This engine block is the ticket to solve main gear strip problem on the T-REX 700 helicopters., Includes:, -One aluminum engine block, Features:*,
-Black anodizing version -One aluminum engine block cap -One (1) ...Flying-Hobby
PRECISION TAIL SET PRO SE
Description:, -The Precision Tail Set PRO is an innovative design from MicroHeli in pursuit of zero slop and bind free operation solution for the T-REX. This is the results of months of research and testing from our designers to come up with a great solution for the T-REX tail. With total of 18 precision bearings in the tail system, this is absolutely the best tail system for the T-REX available on the market. It differentiates itselfs from other designs in many ways:, 1. The new design hinged type tail pitch slider offers dual support positions on both sides with dual ball bearings connections to ensure total fitness and absolute slop free connections. The tail pitch slider itself also is equipped with double precision bearings to ensure slop free and great smoothness. The brass sleeve in the tail pitch slider is done on highest precision machine with tolerance of +/- 0.001mm so that the tail pitch slider always move truely on the tail shaft. This will ensure absolute slop free in all 3 dimensions. Unlike older version which employs blue plastic horn for connection between the tail pitch slider to the tail rotor, this new design employs new CNC hinged arms to eliminate any possible bind when the tail pitch slider moves to extreme ends on each direction thanks to the new flexible arms. The new arms now no longer uses plastic ball ends to connect to the tail rotor but using two precision miniature bearings for precision control. It is a big improvement over stock design which has plastic ball end connections that can wear out over time. All the bearings we are using in this tail PRO are smallest types of bearings on the market. Over years of bearings selections, we can offer smallest precision bearings for lightest weight and great look. This advantage helps reduce the weight to minimum while maintaning superior performance and great outlook. With a fast look, it's hard to believe they are bearings included., Includes:, -1 x CNC Tail Pulley Case, Requires:, -Loctite (#242 is recommended), Weight:, 25.4 grams with all hard,
2. The bell crank in this tail system is a ...Flying-Hobby
90 HIGH PERFORMANCE MUFFLER ( BLACK)
| ●Size | Φ49.1 x 318 x 81.75mm |
| ●Weight | 225g |
| Accessories | ●Muffler x1 |
Instructions:, ●Apply to 90 size helicopters, according to the strength character of 90 engine to design, features much increase the horsepower, fuel-saving, low noise, and the highest air exhaust volume on the market., ●Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and the quick respond of medium speed and high speed, great for 3D flying., Specification:,
●Use for O.S 91SR/HZ & ALIGN 91H/HP engine. ●Muffler Spacer ...Flying-Hobby
50 HIGH PERFORMANCE MUFFLER ( BLACK)
| ●Size | Φ41.2 x 270 x 70.5mm |
| ●Weight | 147g |
| Accessories | ●Muffler Spacer x1 |
Instructions:, ●Apply to 50 size helicopters, according to the strength character of 50 engine to design, features the highest air exhaust volume on the market., ●Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and the quick respond of medium speed and high speed, great for 3D flying., Specification:,
●Suitable for 50H,55H engine. ●Muffler x1 ●Pressure nipple x1 ●Pressure ...Flying-Hobby
JR DS285 DIGITAL HI-SPEED SUB-MICRO SERVO
| Size Category | Minis and Micros |
| Type | Digital |
| Torque | 17 oz/in @ 4.8V, 19 oz/in @ 6V |
| Speed | .18 sec/60 degrees @ 4.8V, .14 sec/60 degrees @ 6V |
| Dimensions (WxLxH) | 0.45"x0.87"x0.85" |
| Weight | .32 oz |
| Bushing Or Bearing | Bushing |
| Motor Type | 3-pole ferrite cored |
| Gear Type | Nylon |
| Application | Electric aerobatic planes, sailplanes, micro-helis and other special applications |